Air cooled condenser and evaporator are very important parts of refrigeration unit which condenses the high-pressure refrigerant vapor from the compressor into a liquid. During the condensation process, the heat released by the refrigerant is taken away by the air. Air can be natural convection or forced flow by fan. This type of air cooled condenser is used in freon refrigeration units where water supply is inconvenient or difficult to supply. Air cooled evaporator is also a kind of heat exchanger, which makes the low-pressure and low-temperature refrigerant liquid absorb the heat of the cooling medium (air, water, brine or other refrigerant) in the boiling process, so as to achieve the purpose of refrigeration. Air cooled condenser and evaporator are the most popular cooling units in refrigeration industry. It has the characteristics of  no cooling tower installation, easy to install and remove, etc. It is suitable for water shortage or poor water quality areas.

Walk in Freezer Air Cooled Condenser and Evaporator

Specifications of Air Cooled Condenser for Walk in Freezer

Types Open type/box type(V-box and U-box)/side discharge type
Refrigerant type R134a, R404a, R507c, R22, etc.
Place to install Indoor/out door
Accessories brand Well-known brand for accessories (solenoid valve, HP, LP controller, etc.)
Voltage 110v/220v/380v/460v/600v, etc.
Controller Auto controller/PLC
Case material Galvanized sheet with plastic powdered painting
Quality assurance 2.8 MPA pressure test before delivery
Welding Using silver electrodes (stable welding pointing and looks nice)
Copper pipe connection Connecting with fitting reducer
Exchange area Enough condenser heat exchanger surface for high ambient temperature countries
Anti-corrosion Using blue fins(hydrophilic aluminum foil)
  • Air cooled condenser is a kind of condenser used air as its cooling medium. It uses fan to accelerate air flow to increase the heat transfer effect of air. Air cooled condenser does not need cooling water. It can save all the equipment needed for water supply and is easy to use and install.
  • Generally, the condensation temperature is 7-12℃ higher than the ambient temperature. The value of 7-12℃ is called heat transfer temperature difference. The higher ambient and condensation temperature, the lower the cooling efficiency of the refrigeration unit, so we should control this heat transfer temperature difference not be too large.
  • If the difference of heat transfer temperature is too small, the heat transfer area and circulating air volume of air cooler will be larger, and the cost of air cooler will be higher. The ambient temperature limit should not be higher than 55℃ or lower than 20℃. Normally, air cooled condensers are not recommended in areas where ambient temperatures exceed 42℃. Therefore, whether air cooled condenser is selected or not, the environmental temperature should be determined first.

Air Cooled Evaporator for Walk in Freezer

Walk in Freezer Air Cooled Condenser and Evaporator
Model DD/DJ/DCJ model
Fan type IP 54 axial fan/tunnel fans (waterproof )
Refrigerant type R134a, R404a, R507c, R22, etc.
Place to install Wall mounted/Ceiling mounted
Voltage 110v/220v/380v/460v/600v, etc.
Case material Galvanized steel/Aluminum/Stainless steel/Embossed steel, etc.
Quality assurance 2.8 MPA pressure test before delivery
Welding Using silver electrodes (stable welding pointing and looks nice)
Fins Wavy fins (form air flow, speed air flow)
Anti-corrosion Using blue fins(hydrophilic aluminum foil)
Parts All are stainless steel screw
Inspection Dry nitrogen to holding pressure
Defrost Water defrost/Hot gas/Electrical
Fin space 6 mm/9 mm/12 mm or variant spacing
Types Discharge/Dual throw/Land

Customer Feedback

Walk in Freezer Air Cooled Condenser and Evaporator
  • Farm factory walk in freezer for fish quick freezing in -35℃ with 2 stage 30 HP air cooled condensing unit;
  • Air cooled condenser is with blue fins that has good anti-corrosion function.
Walk in Freezer Air Cooled Condenser and Evaporator
  • Logistic walk in freezer with rack unit in -20℃, with 2 sets 75 HP screw Bitzer compressor with air cooled condenser;
  • This is mainly for frozen food storage for a long time, matching air cooled condenser that no need install the water pole, easy to install and remove.